Differences

This shows you the differences between two versions of the page.

--- control_board [2022/01/06 03:00] – [AIN_4 v1.2 BACK] phatline
+++ control_board [2022/01/08 15:13] (current) – phatline
@@ Line 8: / Line 8: @@
 VR1-4 AOUT4: 10K Lin\\
 VR1-4 AIN4: 100K Lin\\
-SKT1-4: 3,5 Stereo Jack?\\
+SKT1-4: 3,5 mono Jack\\
-JP21: Clock Input(if you have, then dont set G1_G5 on the backside) \\
+JP21: Optional Clock Input from SKT5 (then don't set G1_G5 on the backside) \\
-J1: Gate/DOUT/Clock - Input - pinout see DOUTx4-Board\\
+J1: Routes gate outputs from a standard DOUT pinheader to SKT 5-8 according to solder jumper pairs Gxx\\
 ===== AIN_4 v1.2 BACK =====
 {{:phatline:Control-AOUT-back.jpg?800|}}\\
@@ Line 16: / Line 16: @@
 RN1: 100k iso 652-4816P-1LF-100K\\
 SJ 1-4: let them unsoldered\\
-SJ 5-8: solder a 1K 0603 SMD Resistor from the Round PAD to 5V- to avoid Floating\\
+SJ 5-8: solder a 1K 0603 SMD Resistor from the Round PAD to GROUND- to avoid Floating\\
 Diodes: 1N4148  >  only Stuff in AOUT4 Usecases\\
 IC2: 74LV14H (SOIC14)\\
@@ Line 33: / Line 33: @@
 {{ :phatline:Control-AOUT-seite.jpg?255|}}
 {{ :phatline:Control-AIN-AOUT-Panel-Label.jpg?500|}}
+**LABELS:**\\
+linke Schalter: offset (uni/bipolar)\\
+rechte Schalter: range (+5V/+10V insgesamt)\\
+\\
+**Deswegen folgende Möglichkeiten für Ein- bzw. Ausgänge:**\\
+bis +2,5V\\
+bis +5V\\
+-2,5 bis +2,5V\\
+-5 bis +5V \\