Differences

This shows you the differences between two versions of the page.

--- mb_visual_metronome [2013/05/26 09:05] – [Master Unit Design] gomiboy99
+++ mb_visual_metronome [2016/06/14 11:54] (current) – [Slave Unit Design] psykhaze
@@ Line 1: / Line 1: @@
 ====== Visual Metronome  ======
@@ Line 6: / Line 5: @@
 At a recent show, there was a problem with the monitors leaving the rest of the band unable to hear the beat. \\
 We normally use a click track but it was not possible at this show. This lead me to come up with this design for a visual metronome so the others know where we are in the bar.
+{{:gomiboy99:vm_slave.jpg?500}}
 I posted my original design in the forum, the reply from technobreath inspired me to redesign the project. \\
@@ Line 18: / Line 19: @@
   * DOUTx2
   * 20x2 CLCD (HD44780)
-  * 3 buttons and 1 encoder on the control surface
+  * 5 buttons and 1 encoder on the control surface
   * LEDs to suit the hardware options
@@ Line 36: / Line 37: @@
 An explanation of the menu/display is {{:gomiboy99:vm_display_v02.pdf|here}}\\
-The source code is available {{:gomiboy99:visual_metronome_v0_2.zip|here}}
+The source code is available {{:gomiboy99:visual_metronome_v02_1.zip|here}}
 Here are some pictures of the master unit that I have built. The board is a home made version of the pic core along with a custom DOUTx2 DINx1 board. I had intended to separate the 2 boards but the whole panel fitted in the case so left them as one. I left several components out of the core part, only the parts required for this project are fitted. The unit is powered by a 5volt SMPS.
@@ Line 63: / Line 64: @@
 The core connections could not be {{:gomiboy99:vm_slave_core.pdf|simpler}}.
-Here is what my version looks like inside
-{{:gomiboy99:vm_slave.jpg?400}}