Differences

This shows you the differences between two versions of the page.

--- mbqg_tb_case [2024/01/20 02:32] – smithy
+++ mbqg_tb_case [2024/01/20 02:43] (current) – smithy
@@ Line 12: / Line 12: @@
 Huge thanks to Technobreath for taking the time to design this case!
-You will need 8 threaded inserts with an internal diameter of 3mm for use with Smithy's PCB Front panel
+You will need 8 threaded inserts with an internal diameter of 3mm for use with [[http://midibox.org/forums/topic/19678-midibox-quad-genesis/?do=findComment&comment=200872|Smithy's PCB Front panel]]
 You can find these m3 threaded inserts with an external diameter of 5mm commonly on
-[[https://a.aliexpress.com/_ExA45x3]AliExpress]
+[[https://a.aliexpress.com/_ExA45x3|AliExpress]]
+The default wooden case thickness is 9mm.
+The 8 threaded inserts will need to be inserted to top of the wooden case.
+I recommend using a 4mm drill bit to drill the pilot holes and drilling a depth of 6mm.
+You can also use these threaded inserts in the base of the wooden enclosure to mount the PCBs.