Differences

This shows you the differences between two versions of the page.

--- midibox_lc [2008/03/20 00:29] – tilted
+++ midibox_lc [2016/08/05 17:58] (current) – ↷ Links adapted because of a move operation 192.243.55.130
@@ Line 10: / Line 10: @@
   * 3x DOUTX4 module for LED rings and LEDs
   * 1x LTC module
-  * 1x [[MF module]] if Motorfaders are to be used.
+  * 1x [[mf_ng_module]] if Motorfaders are to be used.
     If not "in main.asm, you have to set "ENABLE_MOTORDRIVER" to 0, this disables the motor control." as per TK [[http://www.midibox.org/forum/index.php?topic=5262.0|here]]
@@ Line 45: / Line 45: @@
 If you use a potentiometer, the MidiBox can only send the absolute value of the pot, and will only do so when it changes.\\
 Check out [[encoders]] for specifications and where to order.
+===== I want to build a Mackie C4 type box, does the MBLC do this? =====
+No.\\
+That is, not yet.\\
+There is nothing to prevent a Midibox LC/C4 box from working, but some research needs to be done.
+When Mackie made the LC, and then the MCU, they made the protocol public. This was //probably// done to encourage software application support. Unfortunately, the Mackie C4 is not a public protocol. While it is most likely based on a similar design to the MCU, the two are not interchangable.\\
+Short answer: Now is your time to step up and do this research. Make the C4 possible, and win the adoration of your peers!
 ===== Your Turn =====