quad_iic_midi
Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
quad_iic_midi [2018/03/15 17:36] – created goyousalukis | quad_iic_midi [2018/03/15 19:36] (current) – [Parts List] goyousalukis | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ======= Quad_IIC_MIDI Board parts list ======= | ||
+ | {{: | ||
+ | |||
The IIC MIDI module provides a bridge between IIC and MIDI, and mainly consists of a PIC16F88 microcontroller from Microchip, which runs with a special firmware (not MIOS!). | The IIC MIDI module provides a bridge between IIC and MIDI, and mainly consists of a PIC16F88 microcontroller from Microchip, which runs with a special firmware (not MIOS!). | ||
+ | |||
+ | * [[http:// | ||
+ | * {{ :: | ||
+ | |||
+ | ===== Parts List ===== | ||
+ | |||
+ | ^ Description | ||
+ | | IC1-4 | PIC16F88(Must be programmed) | ||
+ | | | IC-Socket for 16F88 | 4 | |575-199318 | | | ||
+ | | LEDx | 3mm LED red | 4 | |696-SLX-LX3044HD | | | ||
+ | | Q1x | 20mhz crystal | ||
+ | | C3 | 10µF Electrolytic capacitor | ||
+ | |C1x,C2x| 15pF Ceramic capacitor " | ||
+ | | C4x | 100nF=.1µF Ceramic capacitor " | ||
+ | | R2x | 220Ω resistor | ||
+ | | R9x | 220Ω resistor | ||
+ | | R10x | 220Ω resistor | ||
+ | | -- | 5 pin DIN connector | ||
+ | | J4 | 1x4 pinheader | ||
+ | |-------|---optional BLM connection parts----|-----| | ||
+ | | IC2 | 6N138 optocoupler | ||
+ | | IC2 | IC-Socket for 6N138 | 1 | | 575-199308| | | ||
+ | | R6 | 1KΩ resistor | ||
+ | | R7 | 4.7KΩ resistor | ||
+ | |R8-R10 | 220Ω resistor | ||
+ | | D1 | 1N4148 diode | ||
+ | | -- | 8 pin DIN connector | ||
+ | | -- | Box Header 2x5 | ||
Mouser Parts Cart: | Mouser Parts Cart: | ||
https:// | https:// | ||
+ | |||
+ | ===== Datasheets ===== | ||
+ | |||
+ | * [[https:// | ||
+ | |||
+ | |||
+ |
quad_iic_midi.1521135374.txt.gz · Last modified: 2018/03/15 17:36 by goyousalukis