Differences

This shows you the differences between two versions of the page.

--- switch [2016/06/07 13:25] – [Introduction] psykhaze
+++ switch [2016/07/10 23:59] (current) – [DIN Connection] psykhaze
@@ Line 1: / Line 1: @@
 ====== Switch ======
-{{ ::neonking:switches.jpg?direct |}}
 ===== Introduction =====
@@ Line 7: / Line 5: @@
 A switch is a small lever or button. It's an electrical device having at least **two states**, ON (the closed state) or OFF (the open state).
-Ideally, a switch device has zero impedance when closed and infinite impedance when open. The switches on the back of printers and on expansion boards are called DIP switches. A switch that has just two positions is called a toggle switch.A "click switch" is called SPST switch.
+Ideally, a switch device has zero impedance when closed and infinite impedance when open. The switches on the back of printers and on expansion boards are called DIP switches.
+A switch that has just two positions is called a toggle switch.A "click switch" is called SPST switch.
+{{ ::neonking:switches.jpg?direct |}}
+===== Some Refs? =====
+There is thousands of switches, describing them here would be impossible.
+You should have a look to <wrap info>[[parts_faq#what_kind_of_switches_do_i_need|Switch Choosing Guide]]</wrap>
+===== Connection =====
+{{ :neonking:encoder-switch-din.jpg?direct&600 |}}
+\\
+\\
+==== Matrix Design ====
+\\
+{{ :neonking:switchmatrix.jpg?direct&800 |}}