Differences

This shows you the differences between two versions of the page.

--- 16x4blm_pcb [2013/02/15 09:29] – [BOM] added supplier for Marquardt switches ilmenator
+++ 16x4blm_pcb [2022/06/17 09:56] (current) – [Where to buy?] ilmenator
@@ Line 8: / Line 8: @@
 ===== Overview =====
-The board holds all necessary components including surface mount shift registers (DOUT and DIN) on the backside and connects via a single 10pin cable to J2 on Wilba's control surface board. Additional modules (BPM and TPC displays) can be connected to a second 10pin connector that loops through all serial I/O signals from J8/J9 of the Core32/LPC17 board. The board features duo LEDs and the very nice {{:home:users:ilmenator:64250101_00_k.pdf|Marquardt 6425}} series of buttons with the {{:home:users:ilmenator:826000011_00_k.pdf|16mm square caps}}.
+The board holds all necessary components including surface mount shift registers (DOUT and DIN) on the backside and connects via a single 10pin cable to J2 on Wilba's control surface board. Additional modules (BPM and TPD displays) can be connected to a second 10pin connector that loops through all serial I/O signals from J8/J9 of the Core32/LPC17 board. The board features duo LEDs and the very nice {{:home:users:ilmenator:64250101_00_k.pdf|Marquardt 6425}} series of buttons with the {{:home:users:ilmenator:826000011_00_k.pdf|16mm square caps}}.
-The buttons do not align with Wilba's MB-SEQ frontpanel design. The reason for this is simple: In my front panel there is a TPC (Track Position Counter) display, a step display, and a [[http://ucapps.de/midibox_seq/mbseq_v4_bpm_digits.pdf|BPM display]] to the left of the button / Duo-LED matrix. A second reason is that the protoboard manufacturer ([[http://www.goldphoenixpcb.com/|Gold Phoenix PCB]]) I used has a size limit that I had to respect.
+The buttons do not align with Wilba's MB-SEQ frontpanel design. The reason for this is simple: In my front panel there is a [[TPD_PCB|TPD]] (Track Position Display), a step display, and a [[http://ucapps.de/midibox_seq/mbseq_v4_bpm_digits.pdf|BPM display]] to the left of the button / Duo-LED matrix. A second reason is that the protoboard manufacturer I used ([[http://www.goldphoenixpcb.com/|Gold Phoenix PCB]]) has a size limit that I had to respect.
 ===== Schematic =====
@@ Line 26: / Line 26: @@
 The total size of the PCB is 335.15mm x 97.92mm.
+===== PCB Layout v2.0 =====
+Meanwhile, I have created a version 2 of the board, which basically has all the features of the original one, plus it can hold three different types of switches:
+- the Marquardt 6425 series (my favourite switches)
+- ITT Schadow D6 series (TK's favourite switches)
+- E-Switch 612-TL1100 series (the ones that Wilba used on the SEQ v4 board).
+{{:home:users:ilmenator:blm16x4:blm_16x4_v2.jpg?600|}}
+{{:home:users:ilmenator:blm16x4:blm_16x4_switches.jpg?600|}}
+==== Where to buy? ====
+If you are interested in building this, send a personal message (PM) to user //ilmenator// over at the [[http://midibox.org/forums/|MIDIbox forum]] (you have to register to be able to send PM). As of June 2022, I have PCBs available for 25€ each. I can also provide you with complete kits with Marquardt or D6 switches in black.
 ===== BOM =====
@@ Line 39: / Line 55: @@
 | R1-R32	| 1/4W resistor	|	| 220	| 32		| | 1/4W 220 | |
 | R33, R34	| 1/4W resistor	|	| 10k	| 2		| | 1/4W 10K | |
-| SW1-SW64	| push switch	| Marquardt 6425.0101* | 		| 64		| 979-6425.0101 | | [[http://www.soselectronic.de/?str=371&artnum=1325&name=marquardt-6425-0101|1325]] |
+| SW1-SW64	| push switch	| Marquardt 6425.0101* | 		| 64		| 979-6425.0101 | TASTE 6425.0101 | [[http://www.soselectronic.de/?str=371&artnum=1325&name=marquardt-6425-0101|1325]] |
-| | key cap | Marquardt 826.000.011 | 16x16mm | 64 | | | [[http://www.soselectronic.de/?str=371&artnum=1484&name=marquardt-826-000-011|1489]] |
+| | key cap | Marquardt 826.000.011 | 16x16mm | 64 | |TASTE S 826 (red!) | [[http://www.soselectronic.de/?str=371&artnum=1484&name=marquardt-826-000-011|1489]] |
-| U1-U6	| 74HC595	| SO16 |		| 6		| | SMD HC 595 | |
+| U1-U6	| 74HC595	| SO16 |		| 6		| 863-MC74HC595ADG | SMD HC 595 | |
 | U7, U8	| 74HC165	| SO16 |		| 2	| 863-MC74HC165ADR2G | | |
 | J1, J2	| connector 2x5			| | | 2		| | WSL 10G | |
@@ Line 51: / Line 67: @@
 ===== Frontpanel =====
-I have had my frontpanel laser cut by [[https://www.ponoko.com/|Ponoko]]. Here is the template:
+I have had my frontpanel laser cut at [[http://www.formulor.de/|Formulor]], the German branch of [[https://www.ponoko.com/|Ponoko]]. Here is the template:
 {{:home:users:ilmenator:blm_16x4_frontpanel.png?600|}}