pickit2
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
pickit2 [2009/01/24 16:00] chr0n1c |
pickit2 [2011/09/16 23:47] (current) dougster |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | HOWTO PROGRAM A PIC18f452 WITH A PICKIT2 | + | ====== **HOWTO PROGRAM A PIC18f452 WITH A PICKIT2** ====== |
| - | This page is here in hopes of helping somone else avoid having to go through what i did in figuring it all out. | + | |
| + | //This page is here in hopes of helping somone else avoid having to go through what i did in figuring it all out.(--chr0n1c)// | ||
| The Pickit2 USB Programmer WILL generate the required voltages for HVP programming of the chip. | The Pickit2 USB Programmer WILL generate the required voltages for HVP programming of the chip. | ||
| - | It is possible to program you midibox core pic chip with this adapter and a Pickt2 from Microchip by following these steps. | + | It is possible to program your midibox core pic chip with this adapter and a Pickit2 from Microchip by following these steps. |
| - | 1. BUILD THIS ICSP ADAPTER | + | **1. BUILD THIS ICSP ADAPTER** |
| In order to do HVP with this circuit, you will need to short | In order to do HVP with this circuit, you will need to short | ||
| the jumper going to pin 38 of the pic18f452. | the jumper going to pin 38 of the pic18f452. | ||
| - | ...will insert my schematic schreenshot here when i can get the uploader to work. | + | ...will insert my schematic screenshot here when i can get the uploader to work. |
| + | |||
| until then it's attached to these forum posts: | until then it's attached to these forum posts: | ||
| - | [[http://www.midibox.org/forum/index.php/topic,10877.0.html|External Link]] | + | http://www.midibox.org/forum/index.php/topic,10877.0.html |
| - | [[http://www.midibox.org/forum/index.php/topic,10500.0.html|External Link]] | + | http://www.midibox.org/forum/index.php/topic,10500.0.html |
| | | ||
| - | 2. PLUG IN YOUR PICKIT2 TO YOUR PC VIA USB. | + | **2. PLUG IN YOUR PICKIT2 TO YOUR PC VIA USB.** |
| - | 3. CONNECT THE PICKIT2 TO THE ADAPTER YOU BUILT IN STEP 1. | + | **3. CONNECT THE PICKIT2 TO THE ADAPTER YOU BUILT IN STEP 1.** |
| pin one of the pickit2 is the pin marked with a small triangle, | pin one of the pickit2 is the pin marked with a small triangle, | ||
| align this with your adapters icsp header's pin one. | align this with your adapters icsp header's pin one. | ||
| - | 4. INSERT YOUR PIC18f452 IN THE ADAPTER'S IC SOCKET. | + | **4. INSERT YOUR PIC18f452 IN THE ADAPTER'S IC SOCKET.** |
| pin 1 of the ic socket will be connected to pin 1 on the pickit2 for a ref. point. | pin 1 of the ic socket will be connected to pin 1 on the pickit2 for a ref. point. | ||
| - | 5. start the pickit2 upload app. that you should already have installed from your pickit2 cd. | + | **5. start the pickit2 upload app.** |
| + | you should already have installed this from your pickit2 CD. | ||
| | | ||
| - | 6. load the most current bootloader file | + | **6. load the most current bootloader file** |
| - | LINK TO THE MIOS DOWNLOADS PAGE: [[http://www.ucapps.de/mios_download.html|External Link]] | + | LINK TO THE MIOS DOWNLOADS PAGE: http://www.ucapps.de/mios_download.html |
| | | ||
| - | 7. CLICK THE UPLOAD HEX FILE BUTTON IN THE PICKIT2 APP. | + | **7. CLICK THE UPLOAD HEX FILE BUTTON IN THE PICKIT2 APP.** |
| + | |||
| + | **8. once the software tells you it's done, click verify.** | ||
| + | |||
| + | **9. PULL THE CHIP FROM THE PROGRAMMING ADAPTER AND INSERT IT TO YOUR MBHP_CORE.** | ||
| + | |||
| + | **10. from here, there is plenty of other documents on the wiki describing the next steps...** | ||
| - | 8. once the software tells you it's done, click verify. | + | LINK: http://www.ucapps.de/mios_bootstrap.html |
| - | 9. PULL THE CHIP FROM THE PROGRAMMING ADAPTER AND INSERT IT TO YOUR MBHP_CORE. | + | other forum posts that were helpful in this research... |
| - | 10. from here, there is plenty of other documents on the wiki describing the next steps... | + | http://www.midibox.org/forum/index.php/topic,11754.0.html -- discussion of me starting to build a MBHP_CORE |
| - | LINK: [[http://www.ucapps.de/mios_bootstrap.html|External Link]] | + | http://www.midibox.org/forum/index.php/topic,9831.0.html - discussion about HVP versus LVP |
| + | http://www.midibox.org/forum/index.php/topic,10050.0.html - another discussion about HVP versus LVP | ||
pickit2.1232812818.txt.gz · Last modified: 2009/01/24 16:00 by chr0n1c
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
