Search
You can find the results of your search below.
Results
- mididocs:seq:beginners_guide:start: 180 Hits
- also edit several tracks simultaneously, e.g. to set their length. In this case the selected track on ... .e. G1T1 and G1T2). At the very least you need to set their type, length, port and MIDI channel. These ... th tracks in this example, but it still has to be set separately for each track. As to the MIDI channel, the simplest solution is that you set both tracks to the same channel, so they're both
- pedal_box:pc_editor_manual: 41 Hits
- information to your PB hardware====
**PIC ID** - Set the PIC ID of your PB hardware here.
**use feedb... mber of the Rig Control Patches. \\
if Static? is set to 'Static' then only Setting 0 is used. If set to change w/pc the setting of the current program chan... ll be used.
* Select the desired Setting
- set the device you want to control with the **Banksti
- pedal_box:manual: 34 Hits
- event on that device
* The value you wish to set the event to
* Finally the Relay Settings
*...
2a. Static? aka 'FIX PED' \\
Each pedal can be set to 1 (static) or 0 (change with rig control patch... l change the bankstick/device and values they are set to by following Rig Control patch change events when set to Static(aka FIX PED) is set to 0.
======Gett
- windows_mios32_toolchain_core: 26 Hits
- bies too, since once the environment is correctly set up, it is very easy to use.
I hope you find this... lchain to wherever you extracted your toolchain)
SET PATH= %PATH%;c:\mios32_toolchain\bin
If you wa... uires some additional environment variables to be set.
We will cover only the settings for using the CORE32 board here:
Before compiling code, set the MIOS32 environment variables:
DOS: (we assum
- pic18f4685_8bit_lcd_driver: 25 Hits
- _POS_REAL unmapped cursor position which has been set with MIOS_LCD_CursorSet
;;
;; Note: the address... before using the registers
;; Example:
;; SET_BSR MIOS_LCD_OPTION1 ; sets BSR to the bank where... define USER_LCD_STATUS_LCD0_DISABLED 0 ; bit0: if set, first LCD disabled
#define USER_LCD_STATUS_LCD1_DISABLED 1 ; bit1: if set, second LCD disabled -- not provided by this driv
- protodeck: 22 Hits
- stly, I design a layout that matches with my live set.\\
I'll add more explicit photos, but for the m... he matrix is updated with the content of the live set.\\
By pushing a button in the matrix itself, a ... as-it would be stupid. It only fits with my live set, with the protodeck and with my mind.\\
Of cour... x, Max For Live & Live.\\
\\
First, the live set.\\
\\
\\
**\\
The live set** (part 1: pic
- macos_mios32_toolchain_core: 13 Hits
- ====How to set up the toolchain for coding MIOS32 apps with OS X====
===steps:===
0- install Xcode\\
1... containing the toolchain files.
You now need to set the path variable for the toolchain bin directory... hain/bin), see the next section about this
===4- set up the paths variables===
For those who don't kn... to know where to find these files. For this, we set up variables in the shell. For example, we will p
- aout_ng: 13 Hits
- ary to get access to the full output value range. Set all jumpers to unipolar mode (see **Configuration... value for each channel. The default value is 800. Set the channel value to FFF. Then adjust P1 until yo... them is normally not possible, but you can try to set the gain to have the average deviation as small a... If you have built the NG with bipolar option, now set the jumper of the channel to bipolar mode. Set th
- pedal_box: 12 Hits
- 7 MIDI devices. \\
Utilising Rig Control it can set them all to your desired settings with a single s... it!
==pbx_config.h in detail==
**PEDALBOARD** - Set to 1 if for Pedalboard mode, or 0 for Pedalbox mo... I_IN** - If you wish to utilise the MIDI IN port, set to 1. Otherwise 0 \\
**MIDI_MERGER** - To forwa... events recieved at the MIDI input
to the output, set to 1. Otherwise 0. \\
**MIDI_MERGER_DISABLE_MAST
- midibox_audiomatrix: 12 Hits
- s as needed. Make the board to get around the one-set-of-inputs, one-set-of-outputs thing.//
<code>
Inputs
1-8 9-16 17-24 25-3... -#--------#--------#---------- 17-32
</code>
Each set of 8 inputs is split in two and goes to two chips in parallel, so that each set of 8 inputs is capable of being routed to any one
- acsensorizer_04: 12 Hits
- ternal Sensors with LEDs; now recognizes QUANTIZE_SET as well (ACMidiProtocol), fixed QUANTIZE_BPM bug
... the values on the screen next to them. A minimum set of additional buttons allow loading and saving of...
All Sensorizer parameters can be controlled and set by sending NRPN messages by MIDI:
- Send NRPN... ontrol type
- Send NRPN LSB (Controller# 98) to set the control parameter
- Send NRPN Data MSB (Con
- pga:postconfigsoftware: 10 Hits
- r details.
Each MIDI channel of the board may be set as “line mixer” (2 audio channels used) or as a f... (4 audio channels used). Yes, each channel may be set either way individually. To set a channel to “line mixer”, send a control change 15 (decimal) with a value below 64. To set a channel to “full mixer”, send a CC 15 value abo
- speakjet_application_software_v_0.1: 9 Hits
- ger SoundFX only by Notes
* Jaw/Tongue control: set position of jaw and tongue by CC, play pitched Al... 7) |
| Volume | SJCC_MASTER_VOL | CC 108 | Omni | Set Main Volume |
^ Synth ^ ^ ^ ^ ^ ^
| OSCx Freqency | SJCC_OSCx_FREQ | CC 101..105 | Poly | Set Frequency of OSC 1 to 5 |
| OSCx Level | SJCC_OSCx_LVL | CC 111..115 | Poly | Set Volume of OSC 1 to 5 |
| Envelope Frequency | SJC
- home:skills:tools: 9 Hits
- te drilling of PCB's and faceplates
* Drill bit set
* Router bit set
* Nibbling tool - for making odd shaped holes (Careful! These can be savage)
... on metal
===== Abrasive/Cutting =====
* File Set - Flat, round, half round, rasp and needle
* H... For stripping insulation from cabling
* Pliers Set - Various Sizes and types
* Side Cutters - For
- ju_control_roland_alpha_juno_control_panel_cs: 9 Hits
- wilba_mb_6582_parts_bulk_order: 8 Hits
- mididocs:v4l:midiprocessing: 8 Hits
- mb808: 8 Hits
- home:project:mb808: 8 Hits
- ssm2044_pcb: 8 Hits
- mbhp_genesis: 8 Hits
- triggermatrix4: 8 Hits
- pga:softwareoverview: 7 Hits
- coilwinder: 7 Hits
- arkade: 7 Hits
- flo: 7 Hits
- midibox_master_keys: 6 Hits
- midibox_quad_genesis: 6 Hits
- how_to_use_xcode2_as_ide_on_a_mac: 6 Hits
- midibox64_e_patchmode: 6 Hits
- home:project:midibox_sid_v1_manual: 5 Hits
- home:mbhp:module:aout_ng: 5 Hits
- acsensorizer_02: 5 Hits
- midibox_sid_v1_manual: 5 Hits
- home:project:midibox_sid:v1_manual: 5 Hits
- core4disc: 5 Hits
- mios_c_simulator_-_debugger: 5 Hits
- dictionary:ascii: 5 Hits
- risc: 4 Hits
- home:project:midibox_sid_tb303_mode: 4 Hits
- pga:midichart: 4 Hits
- home:project:midibox_sid:tb303_mode: 4 Hits
- acsim_console_c: 4 Hits
- how_to_organize_a_bulk_order: 4 Hits
- microprocessor: 4 Hits
- midibox_sid_faq: 4 Hits
- msq-cc-lre-v2: 4 Hits
- windows_toolchain_core: 4 Hits
- midibox_sid_tb303_mode: 4 Hits
- msq-cc-bcr: 4 Hits
- c_tips_and_tricks_for_pic_programming: 3 Hits
- windows_toolchain_quickstart: 3 Hits
- midibox_arp: 3 Hits
- mididoc:midibox_kb: 3 Hits
- korg_wavedrum_midification: 3 Hits
- windows_toolchain_svn: 3 Hits
- mididocs:seq:launchpadblm: 3 Hits
- trsequencer: 3 Hits
- how_to_use_midibox_cv_with_a_dout: 3 Hits
- home:mbhp:module:lcd: 3 Hits
- midibox_pokey: 3 Hits
- pga:preconfigsoftware: 3 Hits
- pga:buildchanbrd: 3 Hits
- pga:stackboards: 3 Hits
- midibox_speakjet_k64_modul: 3 Hits
- linux_mios32_toolchain_core: 3 Hits
- triggermatrix: 3 Hits
- lcd: 3 Hits
- wilba_mb_6582_psuopte: 3 Hits
- msq-cc-lre: 3 Hits
- midibox_lc: 3 Hits
- case_and_frontpanels_diy_common_tools: 3 Hits
- wilba_mb_6582: 3 Hits
- mcan: 3 Hits
- wcoref4_pcb: 3 Hits
- wilba_mb_6582_control_surface_construction_guide: 2 Hits
- instruction: 2 Hits
- cv1: 2 Hits
- m16: 2 Hits
- windows_toolchain_codeblocks: 2 Hits
- cc-looper: 2 Hits
- electronics_diy_common_tools: 2 Hits
- pga:patches: 2 Hits
- simple_midi_specification: 2 Hits
- mb-sidr8tr:start: 2 Hits
- acsim_mios_c: 2 Hits
- questionable: 2 Hits
- howto:dev:autotools-skeleton: 2 Hits
- syntax: 2 Hits
- book_reviews: 2 Hits
- cisc: 2 Hits
- compliant: 2 Hits
- kernel: 2 Hits
- midi_specification: 2 Hits
- frequently_asked_questions_faq: 2 Hits
- stryd_one_preparation: 2 Hits
- wcore: 2 Hits
- meta_events: 2 Hits
- gm5x5x5: 2 Hits
- dseq32_matrix: 2 Hits
- pga:buildregbrd: 2 Hits
- control_board: 2 Hits
- your_page_name: 2 Hits
- wiki:syntax: 2 Hits
- speakjet_control_overview: 2 Hits
- apparat_20_construction_blog: 2 Hits
- euro-midi-io: 2 Hits
- dougwellington_mb6582_panels: 2 Hits
- velocity_converter: 2 Hits
- midibox_seq_quick_reference: 2 Hits
- pga:choices: 2 Hits
- mb_olre16: 1 Hits
- hardsid.dll: 1 Hits
- elo: 1 Hits
- seqv4plus_le_mec: 1 Hits
- dseq32: 1 Hits
- upgrade_cs_step_a_mbsidv1_to_have_shift_function_on_menu_button: 1 Hits
- wilba_mb_6582_parts_list: 1 Hits
- dictionary:gpbutton: 1 Hits
- modules_and_parts: 1 Hits
- lucem: 1 Hits
- mb_visual_metronome: 1 Hits
- using_pic18f4620: 1 Hits
- wilba_mb_seq_pcb_bulk_order: 1 Hits
- midiboxmixer: 1 Hits
- tm5-gateinput: 1 Hits
- openpad: 1 Hits
- midiboxdmx: 1 Hits
- openpad-codeblock: 1 Hits
- cubase: 1 Hits
- tm5-codeblock: 1 Hits
- installing_gputils_and_sdcc_on_ubuntu_8.04: 1 Hits
- mb_matrix: 1 Hits
- coresound: 1 Hits
- mc_protocol_mappings: 1 Hits
- windows_toolchain_notepadplus: 1 Hits
- midibox_3396: 1 Hits
- fadercore_-_vlr-8odisp: 1 Hits
- envelope-follower-bissel-based: 1 Hits
- wilba_mb_6582_prototype: 1 Hits
- midiboxfx_-_midifiying_analog_gear: 1 Hits
- fantomxr: 1 Hits
- ultracore: 1 Hits
- midibox_tia: 1 Hits
- eclipse: 1 Hits
- scale-explorer: 1 Hits
- mb_clock: 1 Hits
- mios_faq: 1 Hits
- mb_2069: 1 Hits
- seq_v4l_mk._ii: 1 Hits
- midibox_ay_patch_menu: 1 Hits
- protocol: 1 Hits
- dip_switch: 1 Hits
- dsr: 1 Hits
- encyclopedia_syntax: 1 Hits
- firmware: 1 Hits
- glitch: 1 Hits
- initialization: 1 Hits
- irq_interrupt_request: 1 Hits
- jedec: 1 Hits
- ks0108: 1 Hits
- nebula_bulk_orders_rean: 1 Hits
- no_nc: 1 Hits
- or: 1 Hits
- pixel: 1 Hits
- pt10_bulk_americas: 1 Hits
- cold_start: 1 Hits
- rf: 1 Hits
- stuartm_stukontrol: 1 Hits
- stryd_one_codeblocks: 1 Hits
- variable_resistor: 1 Hits
- wilba_albs_waldorf_knob_mega_sale: 1 Hits
- z80: 1 Hits
- tos_-_a_tds_controller_blog: 1 Hits
- mididocs:index: 1 Hits
- midimasterclock: 1 Hits
- northernlightx: 1 Hits
- speakjet_breadboard_construction: 1 Hits
- dictionary:assembly: 1 Hits
- midibox_ay_ym_v2: 1 Hits
- db25: 1 Hits
- c_from_first_principles: 1 Hits
- stryd_one_word2doku: 1 Hits
- mb-digiroland: 1 Hits
- wickedblade: 1 Hits
- db9: 1 Hits
- dictionary:alphanumeric: 1 Hits
- adding_two_buttons_for_l_r_sid_selection_instead_of_one: 1 Hits
- fadercore_-_vlr-3x8but: 1 Hits
- encoders: 1 Hits
- mididocs:seq:usingblm: 1 Hits
- dictionary:assembler: 1 Hits
- john_e._finster: 1 Hits
- mbhp_genesis_ls: 1 Hits
- home:mbhp:module:troubleshooting_lcd_displays: 1 Hits
- stryd_one: 1 Hits
- albs_waldorf_knob_bulk_order: 1 Hits
- easy_cv: 1 Hits
- mbqg_fp: 1 Hits
- speakjet_application_software_v_0.2: 1 Hits
- acsim_console_h: 1 Hits
- home:software:windows:word2doku: 1 Hits
- aout_lc_module: 1 Hits
- checksum: 1 Hits
- hex2syx: 1 Hits
- dougwellington_transformer_bulk_order: 1 Hits
- pga:configmixer: 1 Hits
- stm32f4_module: 1 Hits
- changing_din_pins: 1 Hits
- changing_dout_pins: 1 Hits
- acmidiprotocol: 1 Hits
- troubleshooting_lcd_displays: 1 Hits
- midibox_sd_card_sample_player: 1 Hits