Standard 220mm wide modules

A PCB to add 8 Encoders with LED ring for each.

Eagle Files: https://github.com/novski/Midibox/tree/master/VLR-8Enc

BIll of Material

Qty Value Device Package

• 2 ML10 ML10
• 2 ULN2803SO18W SO18W
• 3 100n C-EU025-024×044 C025-024×044
• 6 100nF C-EU025-024×044 C025-024×044
• 6 10k 4306R SIL6
• 4 220 4816P-1SOIC16W SOIC16W
• 3 220 R-EU_0204/7 0204/7
• 3 74HC165N 74HC165NSO16D SO16D
• 3 74HC595 74HC595SO16D SO16D
• 8 BOURNS_PEL12T BOURNS_PEL12T_11-LED-RING PEL12T_11-LED-RING
• 3 TPIC6B595 TPIC6B595SO20W SO20W

Allways look for the cheapest seller, the Price may vary heavy!!! And look for Local dealers preferred. http://www.midibox.org/dokuwiki/doku.php?id=where_to_order_components

I was fascinated about the RGB Shaft of this Encoder so i developed all opon this nice piece. Its not the cheapest but i sell them for a reasonable price.

• 2x10pin Header, 517-30310-6002
• 1xResistor Array 220Ohm SMD,
• 1x74HC595 SMD,
• 2x100nF,

Project Order Basket on Mouser: fadercore_-_vlr-8enc

The PCB is available under: https://vlrlab.com/pcb/10-8-odisplay.html